DIY Floral and Plane Wedding Chandelier

3 min read September 14, 2026 Natalie Mayhew
Share this article

Hanging decor is a hot wedding trend that isn't going anywhere. Personally, I can't get enough of it! Wow your guests with a bold hanging floral arrangement. Hang dreamy flowers with glittered planes that sparkle in the light over your reception tables for a whimsical floral installation that is suspended in mid-air …so impressive and romantic!

Let me show you a simple and inexpensive way to create your very own floral chandelier. You won't believe how easy this statement piece is to create by following this tutorial!!

Project Time
50 to 60 min
Difficulty
Intermediate
Step
1

First, spray paint a Vintage Wood Chandelier gold. Then cut a piece of gold floral grid wire to fit the chandelier. This can be found at your local craft supply store. Use a staple gun to attach the wire to the chandelier.

DIY Floral and Plane Wedding Chandelier step 1 part 1
DIY Floral and Plane Wedding Chandelier step 1 part 2
Step
2

Next, turn the Sand Art Airplanes over and color in the back of the planes with gold foil pen or gold paint. Once dry, turn over and remove the protective film from the front of the Sand Art Airplanes. Rather than sand, use Gold Glitter on the adhesive until the plane is completely covered.

DIY Floral and Plane Wedding Chandelier step 2 part 1
DIY Floral and Plane Wedding Chandelier step 2 part 2
DIY Floral and Plane Wedding Chandelier step 2 part 3
DIY Floral and Plane Wedding Chandelier step 2 part 4
Step
3

Use a small hole punch to punch a hole in the top of the wing. Thread fishing wire through the hole and tie the plane to the bottom of the grid wire.

The plane should hang down under the chandelier.

DIY Floral and Plane Wedding Chandelier step 3 part 1
DIY Floral and Plane Wedding Chandelier step 3 part 2
Step
4

Next, thread faux flowers through the grid in a weaving motion (i.e. under, over, under or vice versa) I started at the top of the chandelier and had the flowers spilling over the top edge of the chandelier. I then hung the chandelier and wove from the bottom to ensure all the green stems were covered with flowers. If guests look up they should only see blooms.

Tip: Use pliers to cut stems to fit

I used a mix of faux florals including Prize Peony, Pink Peony, English Rose, Hermes Rose, Viburnum, Coral Dahlia, White Peony and Cream Dahlia.

DIY Floral and Plane Wedding Chandelier step 4 part 1
DIY Floral and Plane Wedding Chandelier step 4 part 2
DIY Floral and Plane Wedding Chandelier step 4 part 3
DIY Floral and Plane Wedding Chandelier step 4 part 4
Step
5

Once the flowers have been added to the chandelier, use fishing wire to tie the Gold Cheers Calligraphy Cut Out Sign to the bars that hang the chandelier.

The sign should sit high on top of the flowers and the fishing wire keeps the sign upright and centered.

DIY Floral and Plane Wedding Chandelier step 5 part 1
DIY Floral and Plane Wedding Chandelier step 5 part 2
Step
6

Finally, hang the chandelier from a removable hook attached to the ceiling.

Tip: When the chandelier is up you can fine tune the plane placement and adjust any flowers to ensure full coverage.

Be sure to check out my "Fly Away With Me", Travel Themed Wedding, Travel Themed Wedding Chair Backers and DIY Paper Place Wedding Toss. 

DIY Floral and Plane Wedding Chandelier step 6

Oriental Trading is your go-to source for party supplies, crafts, toys, and novelties. With over 85 years of experience, we offer a wide selection of products at unbeatable prices, making it easy to create memorable celebrations.

Learn more about us