DIY Halloween Troll Party Poppers

3 min read September 13, 2026 Amanda Kingloff
Share this article

Halloween surprises don't always have to come via trick-or-treating! You can make these easy Troll Party Poppers from cardboard craft rolls for your kids, or they can help make them for their besties as little Halloween gifts! The fringed and curled ends of the poppers naturally lend themselves to perfect Troll hair—add cut paper features and cute Troll eyes with these whimsical eye stickers. Fill 'em up with a mix of candy and toys to start Halloween with a bang!

Project Time
20 to 30 min
Difficulty
Intermediate
Step
1

Place the craft roll on a sheet of colored paper, lined up with one edge. Make a pencil mark where the roll ends, then roll along the paper to make 3 to 4 more marks. Cut on that line and set this piece of paper aside. This will become the troll's "face" color.

DIY Halloween Troll Party Poppers step 1
Step
2

Trim your second sheet of paper down to 12 inches by 8 inches. With the paper vertically positioned on your work surface, place the cardboard craft roll slightly off center, leaving more space above. The longer side will become the troll's hair. Roll the tube in the paper and tape to secure in place.

DIY Halloween Troll Party Poppers step 2
Step
3

Fringe each end of the rolled paper with scissors by cutting narrow strips all the way around.

DIY Halloween Troll Party Poppers step 3
Step
4

Gently sandwiching the paper between your thumb and scissor edge, pull the paper to curl. You can curl a few strands at a time. Work all the way around one side. Note: You may accidentally break some off but that's fine! Once it's bundled together, you will not notice.

DIY Halloween Troll Party Poppers step 4
Step
5

Cut a 6-inch piece of twine or string to match your paper. Tie it around the tube and then slide the tie up and under the curled fringe while simultaneously pulling to tighten the knot. Tie again to secure in place.

DIY Halloween Troll Party Poppers step 5
Step
6

Tape the ends of the string down onto the craft roll and trim ends.

DIY Halloween Troll Party Poppers step 6
Step
7

Fill the craft roll with toys, confetti, and candy! Make sure the items that you buy fit into the tube like Wiggle Eye Rings, Halloween Stretch Skeletons, and Eyeball Pop-Ups. Add some confetti for an additional festive surprise! Once it's filled, repeat steps 4 through 6 to close the other end.

DIY Halloween Troll Party Poppers step 7
Step
8

Roll the cut paper from Step 1 around the craft roll and tape to secure on the back.

DIY Halloween Troll Party Poppers step 8
Step
9

If you want to add a stylish hair-do, cut a wild, Troll-approved style and use a glue stick to adhere to the top of the roll.

DIY Halloween Troll Party Poppers step 9
Step
10

Cut funny-shaped ears from craft paper. Make sure to leave a small tab on each ear so that you can fold it back and tape it onto the sides of the tube.

DIY Halloween Troll Party Poppers step 10
Step
11

Cut inner ears, mouth and nose out of various colors of craft paper and adhere onto the craft roll with a glue stick.

DIY Halloween Troll Party Poppers step 11
Step
12

Choose your favorite set of eyes from the Cute Colorful Eye Stickers roll and adhere them to the Halloween Troll Popper.

DIY Halloween Troll Party Poppers step 12
Step
13

To "pop" your popper, pull the tassels at either end until one or both pop off and shower you in Halloween treats!

DIY Halloween Troll Party Poppers step 13

Oriental Trading is your go-to source for party supplies, crafts, toys, and novelties. With over 85 years of experience, we offer a wide selection of products at unbeatable prices, making it easy to create memorable celebrations.

Learn more about us