DIY Race Track Cake Stand

3 min read September 13, 2026 Alison McKown
Share this article

This DIY Race Track Cake Stand will kick your party into high gear! With a few materials and the simple step-by-step tutorial below, your dessert table will go from 0 to 60 in no time! This Race Track Cake Stand will be such a fun added detail to any race car party.

Project Time
60 to 90 min
Difficulty
Beginner
Step
1

First, separate the top and base of the Footed Cake Stand. Apply a layer of Black Chalkboard Paint to the entire base. Allow to dry fully.

DIY Race Track Cake Stand step 1
Step
2

Next, flip over the top of the cake stand so that the bottom is facing up. With a marker, draw a circle in the center of the stand. It might be helpful to use a bowl or protractor as a guide to ensure a uniform circle.

DIY Race Track Cake Stand step 2
Step
3

Next, to create the illusion of grass that is in the center of a race track, apply Green Acrylic Paint inside the entire circle. Allow the paint to dry.

DIY Race Track Cake Stand step 3
Step
4

While the green paint in drying, cut a series of small rectangles out of Painter's Tape. Apply these pieces of tape in a circle in the middle of the unpainted portion of the cake stand. These pieces of tape will represent the dashed lines of the "road" portion of the race track.

DIY Race Track Cake Stand step 4
Step
5

Then, paint the remaining underside portion of the Footed Cake Stand in Black Chalkboard Paint. Feel free to paint directly over the Painter's Tape. Allow chalkboard paint to dry fully.

DIY Race Track Cake Stand step 5
Step
6

Once completely dry, carefully peel off the Painter's Tape, revealing the clear dashed lines.

DIY Race Track Cake Stand step 6
Step
7

With a small paint brush, paint over the clear dashed lines with White Acrylic paint. Don't worry about overpainting into the black. Any white run off will not appear or be noticable when the cake stand is turned right-side up.

DIY Race Track Cake Stand step 7
Step
8

Now it's time to add some cars! Apply a small amount of hot glue to the bottom of each Die Cast Race Car and place them around the base of the cake stand, all driving in the same direction. Then screw together the top and base of the cake stand.

DIY Race Track Cake Stand step 8
Step
9

Flip the cake stand over so it is now right-side up. Then, apply hot glue to the tires of the cars and attach to the outer lanes of the race track. Make sure all of the cars are driving in the same direction.

DIY Race Track Cake Stand step 9
Step
10

Now it's time to fill your DIY Race Track Cake Stand with cupcakes or other goodies and display at the party! Also, be sure to download the FREE printable cupcake toppers!

Be fast or be last! Don't miss any of the details from ourKids Race Car Birthday Party. It's full of so many high-octane party ideas like the Race Track Party Game tutorial and the FREE race car printable pack. It's guaranteed to make your party go full throttle!

DIY Race Track Cake Stand step 10

Oriental Trading is your go-to source for party supplies, crafts, toys, and novelties. With over 85 years of experience, we offer a wide selection of products at unbeatable prices, making it easy to create memorable celebrations.

Learn more about us