DIY Glam Halloween Crows

3 min read September 13, 2026 Natalie Mayhew
Share this article

From Edgar Allen Poe's "The Raven" to Alfred Hitchcock's "The Birds", black crows have evoked a sense of fear and foreboding as far back as ancient mythology. These fearless jet black carrion birds are the perfect creepy addition to a ghoulishly glam bar cart for Halloween. With just a few supplies, you can dress-up the Feathered Crows ready to oversee the serving of "Boo-ze" to your guests! Add a cage, gold bones and creepy purple moss to complete the Gothic mansion aesthetic for the most gruesome of gatherings this Halloween.

Project Time
50 to 60 min
Difficulty
Intermediate
Step
1

Using the template provided for download, trace the shapes onto bright Halloween colored, patterned or glittered card stock. Cut out the shapes with scissors or use circular hole punches. Next, hot glue the pieces of the hat together. Glue the "top hat stack" into a cylinder shape, add the top and bottom of the stack to the cylinder. Then glue the enclosed cylinder to the "top hat brim".

DIY Glam Halloween Crows step 1 part 1
DIY Glam Halloween Crows step 1 part 2
DIY Glam Halloween Crows step 1 part 3
DIY Glam Halloween Crows step 1 part 4
Step
2

Next decorate the mini top hat. Cut a small length of Purple Glitter Tulle Roll and along with a Purple Ostrich Feather glue to the bottom of the top hat. Then stick on a strip of jewels to top of the hat.

DIY Glam Halloween Crows step 2 part 1
DIY Glam Halloween Crows step 2 part 2
DIY Glam Halloween Crows step 2 part 3
Step
3

Once the top hat is complete, hot glue the hat to the crow's head.

DIY Glam Halloween Crows step 3 part 1
DIY Glam Halloween Crows step 3 part 2
DIY Glam Halloween Crows step 3 part 3
Step
4

Next, create a tissue paper necklace for the crow. Lie approximately 3 sheets of tissue paper on top of each other and cut a strip of tissue. The strip should be approximately 2 inches wide and 6 inches long. It can be shortened to fit. Make small evenly spaced cuts into both sides of the tissue leaving a small uncut strip in the middle. Next, place the tissue on a flat surface and "fluff" up the cut edges. Then apply glue to the uncut strip and attach to the crows neck. Cut off any excess tissue.

DIY Glam Halloween Crows step 4 part 1
DIY Glam Halloween Crows step 4 part 2
DIY Glam Halloween Crows step 4 part 3
DIY Glam Halloween Crows step 4 part 4
Step
5

As an alternative decoration for the crow's neck add a strip of Medium Gold Rolled Jewels. Then cut a circular strip (use the hat brim template provided - cut out the 2nd circle in the middle to create a necklace) of card stock. Make a small cut so that the necklace can be fit around the neck of the crow. Before putting the necklace on, fold the card stock with small folds like a concertina. Next glue to the crow's neck below the jewels.

DIY Glam Halloween Crows step 5 part 1
DIY Glam Halloween Crows step 5 part 2
Step
6

Next, fill a Black Birdcage Card Holder with purple moss and lay some gold bones inside. Place the resting crow on top of the bones. It can be secured to the bones with the small pieces of wire coming out of its claws.

DIY Glam Halloween Crows step 6 part 1
DIY Glam Halloween Crows step 6 part 2
DIY Glam Halloween Crows step 6 part 3
DIY Glam Halloween Crows step 6 part 4
Step
7

Finally, add the crow with outstretched wings to the top of the cage, securing it with the wire attached to the claws. The cage can then be placed on top of a Small Black Fluted Column covered in creepy cloth to complete the Gothic glam look.

For more Halloween ideas and inspiration check out myGhoulish Graffiti Glam Halloween Bar Cart and DIY Graffiti Glam Halloween Skull.

DIY Glam Halloween Crows step 7 part 1
DIY Glam Halloween Crows step 7 part 2
DIY Glam Halloween Crows step 7 part 3

Oriental Trading is your go-to source for party supplies, crafts, toys, and novelties. With over 85 years of experience, we offer a wide selection of products at unbeatable prices, making it easy to create memorable celebrations.

Learn more about us