DIY Low Wood Picnic Tables

3 min read September 14, 2026 Christie Troxell
Share this article

Dining outdoors is a favorite pastime, why not celebrate your wedding day with a picnic themed party with this low wood table that you can make yourself. It's simple to do, and in just a few steps you'll have a fully functional low wood table complete with lace runner. This is a practical project that will provide comfort and function for your guests, as they dine on casual picnic fare, atop a cozy blanket and pillows.

Project Time
40 to 50 min
Difficulty
Beginner
Step
1

Using a ruler or yardstick, carefully measure the stained wood sign and one of the wood flower boxes to determine the center point of each. Place the flower box on the wood board where you wish to adhere it.

DIY Low Wood Picnic Tables step 1
Step
2

Outline the edges of the wood flower box using a chalk marker. Don't worry about the lines showing, this will be the bottom of the table by the end of this project! Repeat this step on the opposite end of the wood sign.

DIY Low Wood Picnic Tables step 2
Step
3

Reserve the wood flower box by placing it aside. Apply a line of wood glue along the chalk line that you created. Again, don't worry too much about getting this line perfect, this part of the low wood table won't be visible when the project is complete.

DIY Low Wood Picnic Tables step 3
Step
4

Place the wood flower boxes into the glue as shown, and align well. Measure again to be sure they are properly placed, then allow to dry overnight.

DIY Low Wood Picnic Tables step 4
Step
5

Using scissors, trim a length of ivory lace to fit the width of the table. Believe it or not, this simple scrap will become a built in lace table runner when you're finished.

DIY Low Wood Picnic Tables step 5
Step
6

Apply a generous coat of Mod Podge to the center of the table using a paint brush. This is the base for where you will place the lace scrap.

DIY Low Wood Picnic Tables step 6
Step
7

Lay the lace scrap across the center of the table, and apply more Mod Podge to the surface of just the lace. Be careful not to extend the Mod Podge on to the bare table surface, as it will make the finish matte and create a less professional finish.

DIY Low Wood Picnic Tables step 7
Step
8

Use scissors to trim the edges of the lace that may have overlapped the edge of the table, and discard or save for another project. Allow the Mod Podge to dry thoroughly before using your completed table. The decoupage adhesive goes on white, but don't worry, it dries completely clear!

 

Be sure to see my Picnic Styled Wedding, DIY Throw Pillows and Orange and Honey Paloma Cocktail. 

DIY Low Wood Picnic Tables step 8

Oriental Trading is your go-to source for party supplies, crafts, toys, and novelties. With over 85 years of experience, we offer a wide selection of products at unbeatable prices, making it easy to create memorable celebrations.

Learn more about us